Charge the GoDaddy Smart Terminal Pro
Step 3 of the GoDaddy Smart Terminal Pro get started series.
Your GoDaddy Smart Terminal Pro comes packaged with an accessory hub, USB-C power cable and a power adapter.
For best results, make sure to charge your Smart Terminal Pro completely before you use it. This is especially important when you’re using it for the first time. It usually takes about 3.5 hours to fully charge the Smart Terminal Pro.
Required: When the display and stand are connected, the power cord must be plugged into the accessory hub to charge the display—not the USB-C port on the side of the display. When the display is connected to the stand, it only receives power through the accessory hub.
- After connecting the accessory hub to the stand, plug the USB-C power cable into the hub and into the power adapter. Connect the power adapter to a power source.
- Make sure the display is connected to the stand.
- Allow it to charge for 3.5 hours. While it’s charging, you can lightly tap the power button on the side of the display to see the current battery charge.
- Once the Smart Terminal Pro is fully charged, press the power button on the side of the display for three seconds to turn it on.
Note: Because the power cord runs through the stand, we recommend leaving the display connected to the stand as much as possible to make sure it maintains a charge.